RootX on Sale: Application Notes and Directions - Pipe Doctor USA

(redirects you to our secure online store)

thepipedr@aol.com

Application Notes and Directions

If the root intrusion is heavy, (i.e. near blockage), it is recommended that the roots be cut prior to the RootX treatment.
If you must cut out the roots before application, RootX must be applied immediately, (within the first hour), or you will need to wait 6-8 weeks. The reason for this is that as soon as roots are damaged or cut, they start secreting sap. The sap will build up enough to become a barrier between the chemical and the wood tissue within 2-4 hours. By waiting 6-8 weeks, you will have given enough time for the roots to grow back through the sap, thus allowing for the RootX to come in contact with the wood tissue.
If RootX Foam gets on any carpet, do not apply any cleaning detergent. Allow the foam to dry and vacuum it up. Otherwise, discoloration may result.
Always pour the entire amount of RootX you will use at the same time in the same location.
TOILET APPLICATION
Step 1: Gather your materials. RootX, bucket, stir stick, complimentary latex gloves.

NOTE: Use ONLY a 2 Lb. jar of RootX as a 4 Lb. jar will overflow the toilet.

Step 2: Empty the contents of the RootX jar into the bucket. Look for the paper divider that separates the two RootX chemicals and discard it.

Step 3: Mix Well. Mix the dry contents of the RootX jar completely. It is important that the two parts of the RootX canister mix thoroughly. Thorough mixing insures optimal foaming and root coating.

Step 4: Test the flush time of the toilet. Since RootX foams on contact with water, it is important to know how fast the toilet bowl drains, so you don't run the risk of overflowing the bowl with foam. If the flush time is slow, use method A, (below). If the flush time appears normal, the preferred method is B, (below).

Method A: Flush while you are poring
RootX into the bowl
Method B: Immediately after pouring
RootX into the toilet bowl - flush!

Step 5: With your method of flushing in mind, por the RootX mixture into the toilet bowl.
OUTSIDE "IN-GROUND" CLEAN-OUT APPLICATION
Step 1: Gather your materials. RootX, bucket, stir stick, complimentary latex gloves.

NOTE: Use Either a 2 Lb. or 4 Lb. jar of RootX.

Step 2: Empty the contents of the RootX jar into the bucket. Look for the paper divider that separates the two RootX chemicals and discard it.

Step 3: Mix Well. Mix the dry contents of the RootX jar completely. It is important that the two parts of the RootX canister mix thoroughly. Thorough mixing insures optimal foaming and root coating.

Step 4: Pour the RootX down the clean out valve.

NOTE: Do NOT add water to the bucket, just pour in the dry mixture.

Step 5: Pour three to five (3 to 5) gallons of water down the clean-out after the RootX. You should observe some foaming in the pipe.

Remember to restrict water usage from four to six (4 to 6) hours after treatment to assure full absorption of the RootX into the roots.

RootX is fast and easy to apply with no special equipment required. For severely blocked pipes where mechanical root cutting is also needed, be sure to treat the pipe with RootX within the first hour after cutting the roots to ensure proper chemical absorption.

Each box or case of RootX jars comes with two pairs of gloves and two dust masks for use when handling the RootX chemical. Choose the application method that works best for your location.

RootX jars offer a convenient method for treating residential service laterals and septic systems. The cleanout is the preferred method for most residential applications because the cleanout is closest to the pipes where roots can cause problems. If there’s no cleanout at your customer’s location, you can apply RootX using the toilet. To prevent foam overflow outside the pipeline, you should only use a 2-lb. jar of RootX in a toilet application.

Cleanout Method

Pour the RootX chemical directly from the jar into the system cleanout.
Pour 1 1/2 to 2 gallon of water per pound of RootX used to activate the root-killing foam.
The natural flow of the line carries the foam down the pipe.

Toilet Method

Pour the RootX chemical directly from the jar into the toilet.
Flush the toilet to activate the root-killing foam.
The natural flow of the line carries the foam down the pipe.

Septic system applications

Pour the RootX chemical directly from the jar into the septic tank.
Pour 1 1/2 to 2 gallon of water per pound of RootX used to activate the root-killing foam.
Pour RootX into the distribution box to kill roots intruding into drain field lines.

After a residential application, your customers should limit water use for at least an hour, allowing time for roots to absorb the RootX chemical.

filling_rootx_jars

RootX boxes
RootX comes in 40-lb. boxes for treating longer lines and service laterals, as well as municipal main lines. For pipes smaller than 8 inches, use the direct pour or vacuum method. For 8-inch and larger pipes, you can also use the FDU 100 foam dispersal unit. With the FDU 100, you can treat more than twice as much pipe using the same amount of RootX.

SEE THE ROOTX VIDEO:

PLEASE CALL OUR OFFICE WITH ANY QUESTIONS OR PROBLEMS
1-800-Pipe-Doc // 1-800-747-3362

VISIT OUR

1-800-Pipe-Doc // 1-800-747-3362

THE PIPE DOCTOR

1-800-Pipe-Doc // 1-800-747-3362

Pipe Doctor, USA serve the following cities and communities in Southern California:

Los Angeles County:
Agoura Hills, Alhambra, Arcadia, Artesia, Azusa, Baldwin Park, Bellflower, Beverly Hills, Big Pines, Burbank, Carson, Century City, Cerritos, Chatsworth, China Town, City of Industry, Claremont, Commerce, Compton, Covina, Culver City, Downtown LA, Downey, Eagle Rock, El Monte, El Segundo, Encino, Gardena, Glendale, Glendora, Granada Hills, Hawaiian Gardens, Hawthorne, Hermosa Beach, Hidden Hills, Highland Park, Hollywood, Inglewood, Irwindale, Japan Town, Korea Town, La Canada/Flintridge, La Crescenta, La Habra, La Mirada, La Puente, La Verne, Lakewood, Lancaster, Lenox, Lomita, Long Beach, Los Angeles, Los Nietos, Lynwood, Manhattan Beach, Marina Del Rey, Monterey Park, Montrose, Northridge, Norwalk, Palmdale, Palos Verdes Estates, Paramount, Pasadena, Pico Rivera, Pomona, Rancho Palos Verdes, Redondo Beach, Reseda, Rolling Hills Estates, San Fernando Valley, San Gabriel, San Marino, Santa Clarita, Santa Fe Springs, Santa Monica, Signal Hill, South Pasadena, Temple City, Torrance, Valinda, Van Nuys, Ventura County, Verdugo City, Walnut, West Covina, West Hollywood, Westlake Village, Westwood, Whittier and all other cities and communities of Los Angeles County.

Orange County:
Aliso Viejo, Anaheim, Balboa Island, Brea, Buena Park, Capistrano Beach, Corona Del Mar, Costa Mesa, Coto de Caza, Cowan Heights, Cypress, Dana Point, El Modena, El Toro, Foothill Ranch, Fountain Valley, Fullerton, Garden Grove, Huntington Beach, Irvine, La Habra, Laguna Beach, Laguna Hills, Laguna Niguel, Lake Forest, Leisure World, Lemon Heights, Los Alamitos, Mission Viejo, Modjeska Canyon, Newport Beach, Orange, Orange Park Acres, Placentia, Rancho San Margarita, Rossmoor, San Clemente, Santa Ana, Seal Beach, Silverado Canyon, Stanton, Sunset Beach, Surfside, Tustin, Villa Park, Westminster, Yorba Linda and all other cities and communities of Orange County.

San Bernardino County:
Adelanto, Apple Valley, Argus, Baker, Barstow, Big Bear, Bloomington, Chino, Chino Hills, Cima, Colton, Daggett, Devore, Earp, El Mirage, Etiwanda, Essex, Fawnskin, Fontana, Forest Falls, Grand Terrace, Harvard, Helendale, Hesperia, Highland, Hinkley, Hodge, Ivanpaw, Joshua Tree, Kelso, Landers, Lenwood, Loma Linda, Lucerne Valley, Ludlow, Montclair, Morongo Valley, Muscoy, Needles, Ontario, Oro Grande, Phelan, Pinon Hills, Rancho Cucamonga, Redlands, Rialto, Running Springs, San Bernardino, Twenty Nine Palms, Upland, Victorville, Wrightwood, Yucaipa, Yucca Valley and all other cities and communities of San Bernardino County.

Riverside County:
Anza, Arlington, Banning, Beaumont, Blythe, Cabazon, Calimesa, Canyon Lake, Cathedral City, Cherry Valley, Coachella, Corona, Desert Hot Springs, Edgemont, El Cerrito, Gilman, Glen Avon, Glenn Valley, Hemet, High Grove, Home Gardens, Homeland, Hot Springs, Idyllwild, Indian Wells, Indio, La Sierra, Lake Elsinore, Lakeview, La Quinta, Mecca, Mead Valley, Meadow Brook, Mira Loma, Moreno Valley, Murrieta, Murrieta Hot Springs, Norco, Nuevo, Palm Desert, Palm Springs, Perris, Quail Valley, Riverside, Rancho Mirage, Ripley, Rubidoux, Sage, San Jacinto, Sun City, Temecula, Temescal Canyon, Thousand Palms, Valle Vista, White Water, Winchester and all other cities and communities of Riverside County.

Imperial County:
Brawley, Calexico, Calipatria, El Centro, Holtville, Imperial, Westmorland and all other cities and communities of Imperial County.

Ventura County:
Camarillo, Fillmore, Moorpark, Ojai, Oxnard, Port Hueneme, San Buenaventura, Santa Paula, Simi Valley, Thousand Oaks and all other cities and communities of Ventura County.